Portforwarding /Port weiterleitung to Gl.inet AR 300M 16

adrias · 2024-05-16T08:10:44+00:00

Sunrise community - customers help other customers with topics related to television, Internet, telephone and mobile. Register now!

adrias

I have a sunrise fibre internet, i was trying to do portforwarding to connect gl.inet. this some how doesnt work, does any one has a solution

maxell182

adrias

I just checked the manual of said router.

Since you already have the Sunrise Router you don’t wan’t the AR300M to be setup as another router (Double NAT).

Please config the AR300M as an AccessPoint
More Settings - GL.iNet Router Docs 3 (gl-inet.com)

To do so:
If the AR300M is now in router mode, its settings are reachable by 192.168.8.1 which is not in the range of the Sunrise Routers IP Range.

--> take a Laptop/PC and configure the IP of the Network to an IP in the Range of the AR300M (eg. 192.168.8.10)
and connect directly with ethernet to it.
Once in the adminpanel, change its operating mode to AccessPoint, once its done, you can connect it via LAN to the Sunriserouter and all should work as expected.

Probably, if you connect to the AR300Ms Wifi you also will be able to get into its settingmenu via default IP.

br maxell182

adrias

Thanks, will check it and update here

adrias

Unfortunately didnt help at all, still struggling with Portfrowarding. I have other friends (not Sunrise) who could do it very easily and I myself could do it on Fritzbox.

if I connect another device (GLinet AR300M) via Lan, i could do portforwarding with in 5 minutes and could get GLiNet (VPN Server) up & running with in no time but Sunrise Fibre box does create a problem