Some time ago I asked for help regrding the Connection of the Connect Box 3 with my ASUS mesh router. Ultimately I was advised to buy a ubiquity switch to connect to connect box’s port 4. Unfortunately many weeks have passed and I do not see any improvement. My question: based on your experience, which mesh router+satellite could work best with the connect box 3? I’d take the opportunity to upgrade to WiFi 7. Is there anything that needs to be checked to make sure I fully get the 2.5Gb/s? Thank you so much

@"Bianpie"#p291732 your setup looks like the sketch? If yes, you have this option without getting any new equipment: 1. Run the Connect Box 3 on Router Mode. Disable the WIFI on the Connect Box 3. 2. Connect the Ubiquiti switch to Port 4 of the Connect Box 3. 3. Change the operation mode of the Asus router to Access Point/AP-Mode and connect the WAN Port to the Ubiquiti switch. 4. Plug the Computer into another Port of the Ubiquiti switch Now your Computer will have a faster connection and your Asus router has the same speed as before. You can still connect devices to the Asus router but they will only get 1Gbit/s. Only the Ubiquiti switch will share the faster speed.

hello @"Bianpie"#p291636 I do remember the conversation we had regarding the speed issue. The Ubiquiti switch is proven, not to affect the speed provided on Port 4 of the Connect Box 3. Pointing out the switch wasn't a shopping advice. Yesterday I did take my home-network apart, removing one of my WiFi AP's (Zyxel NWA130BE), to do some testing with the Connect Box 3. With a MacBook Air 13" 2022 M2 I got like 850-900Mbit/s on the Wifi-Connection. The WiFi Connection on the MacBook showed 1.2G and it was on the 5GHz band. [upl-image-preview uuid=6807ddab-72cd-415d-8591-a1f868852c6b url=https://community.sunrise.ch/assets/files/2025-09-20/1758360092-935565-2c630790-51dc-4b09-9889-9efa220e3bd9.png alt={TEXT?}] The test on a Samsung S24 showed speeds up to 1.63 Gbit/s. The 6GHz band was used for this test and the device showed 6e. [upl-image-preview uuid=3f811687-cdc7-4f89-894d-075d7fbafd06 url=https://community.sunrise.ch/assets/files/2025-09-20/1758360268-745897-image.png alt={TEXT?}] The only time, I got full speed, was when I tested on my PC with a 2.5Gbit/s NIC over LAN cable. On all tests there were two managed switches (Zyxel XGS1210-12 v2) and an unmanaged switch (Zyxel MG-105) between the Connect Box 3 and the PC or the AP. There might be other network equipment, working well with the Connect Box 3. Like i said, Ubiquiti and Zyxel devices have shown, not to affect the port speed of the Connect Box 3. Some devices from other brands impacted the port speed dramatically, almost reducing it to less then 100Mbit/s. WiFi connections tend to be very unstable, when it comes to speed. Sometimes it's good, sometimes fair or even poorly. There are many things that can play into the quality of the signal. The only proven way, to get most of the speed, is using a computer with a build in NIC that is capable of 2.5Gbit/s or more.

@"Xydocq"#p291718 Thank you so much, you are so helpful! As recommended, I bought the Ubiquiti; i connected it to the box 3 and on the other side i have my mesh router ASUS. I’m trying to figure out how to get the same LAN speed from my mesh router as I do from the LAN connected to the box 3. It seems like when I connect the LAN directly to the box 3, I get speeds over 2Gb, but when I connect it to my router, even with the Ubiquiti in between, I only get half of that speed.

@"Bianpie"#p291720 could you please provide some information how your network setup looks like. My setup looks like this: Internet - Connect Box 3 (Router Mode) - Switch 1 - Switch 2 - Zyxel Router (DMZ) - LAN Switch - WIFI AP/Computers Or if possible a sketch [upl-image-preview uuid=30ad99d2-d305-4f3c-8bc1-4fe50c722093 url=https://community.sunrise.ch/assets/files/2025-04-17/1744892380-48937-9a3b68b5-38c1-4d10-8824-624a44b02167.png alt={TEXT?}] Those are just examples.

@"Xydocq"#p291731 First if all many thanks, very kind from you to interact on a saturday afternoon. Actually my set-up is exactly like yours, except that in my case from the ubiquiti i only have one wan which connects to the ASUS

@"Xydocq"#p291733 This is amazing, never thought about using the box as router. Awesome, I’ll set it up as you described. Enjoy your weekend!

@"Xydocq"#p291733 Friend, I have done all you said. Connected box 3 with ubiquiti and then ASUS, all using the 2.5B ports. I ran a speed test using the ASUS itself (so no connections, no wifi…) but i get only half. What could it be?[upl-image-preview uuid=2af15578-97ef-4e75-94e6-fdaa905b930f url=https://community.sunrise.ch/assets/files/2025-09-21/1758446481-631829-img-0480.jpg alt={TEXT?}]

hello @"Bianpie"#p291779 I wouldn't worry too much about this. Even tough a device has a 2.5Gbit/s port, doesn't mean it will make full use of it, here are some examples: - Cisco Meraki Go GX-20 1Gbit/s port, max troughput 250Mbit/s - Zyxel USG Flex 50 1Gbit/s port, max troughbut 260Mbit/s - Zyxel USG Flex 200 1Gbit/s port, max troughput 650Mbit/s I can't find any information on the real troughput of the ASUS router you have. My XT8 got a max of 1.6Gbit/s on the Connect Box 3 and with my WiFi7 AP using the fastes WiFi device at hand it was max 1.61Gbit/s. No other device I have supports WiFi7, so they are way slower. I am a customer, just like you. I've had many different devices in use. I can talk about the devices I've had but I am not going to buy devices, just to test them. Nor should you. To make full use of the 2.5Gbit/s is almost impossible. I monitor my connection and the most download speed I use, is around 170Mbit/s. That's when my server runs a backup-task. During normal use the most is 30Mbit/s. Most of it is used by the TV-Boxes. Also, the server you download from, needs to support the speed. Since bandwith is still expensive, most don't.

@"Xydocq"#p291789 well, you have been so kind and helpful, i do not want to abuse your patience. I hoped that all 2.5Gb wired connected box 3 -> ubiquiti -> ASUS XT 8 I could read some higher speed on the XT 8 itself, as there is not wifi or anything else in between. I’m running the speed test provided by the router itself, so no further connections (when it goes to wireless i accept a drop, no problem). Should i buy a new router with a better 2.5Gb port or 10Gb port, so that the 2.5Gb effectively arrive at the router? Please enjoy your Sunday

@"Bianpie"#p291804 I did some testing with my XT8. But first, you don't run the Asus router in AP mode, it is still set to run as Router. The speedtest isn't available in AP mode. Anyway here are the results: Baseline-Test 2.5Gbit/s NIC on Computer [upl-image-preview uuid=bb0966d2-3cd2-4735-9fca-5ab9b4482f40 url=https://community.sunrise.ch/assets/files/2025-09-21/1758467735-45754-a4e89d75-363f-4a0e-8771-cc2850b01b05.png alt={TEXT?}] Now the ASUS XT8 running on Router Mode: [upl-image-preview uuid=33ade0f3-6610-4815-8590-09d9062b68a7 url=https://community.sunrise.ch/assets/files/2025-09-21/1758467790-833506-791e6823-0d69-4445-8e12-b82d7b1d2121.png alt={TEXT?}] I also got results around 1300Mbit/s so it was almost everything in between. Now the MacBook air on the Asus WiFi: [upl-image-preview uuid=67b63402-0ceb-4a9b-a5f3-11c9bc1cb768 url=https://community.sunrise.ch/assets/files/2025-09-21/1758467959-656974-image.png alt={TEXT?}] the MacBook Air maxes out at the speed of the wifi-signal. So it doesn't say anything about the real speed of the connection.

@"Xydocq"#p291811 You are absolutely right, I had to revert back to router mode to run the test. Well, I still find it funny that sunrise comes in with well above 2 Gbit and the ASUS can onlyget to 1.8 (in my case 1.3 max). I was wondering if this is an issue with the ASUS or elsewhere. Enjiy your sunday evening

How to get 2.5Gb/s

sunrise_testga2

Thanks for the feedback! It was really helpful 🙂

« Vorherige Seite