WIFI Extender - Technische Details sowie Erklärung der Statuslampen

WiFi Extender - technical details and explanation of the status lamps

Daniele_Sunrise · 2024-07-02T09:42:28+00:00

https://community.sunste.ch/assets/2024-07-02/1719904421-394739 wifi-Extender-2.png ** Technical details: ** Technology: HFC / XGS Pon Compatible: Connect Box 1, 2, 3 + 3 Fiber + 3 Ethernet/DSL Wifi: WiFi 6 - 2.4 GHz, 5 GHz, WPS LAN: Max Speed 1 Gbit/S DECT: no Seller: sagemcom Electricity consumption: 4.68 watts (standby), 4.92 watts (active) Mass: 100 mm /47 mm /145 mm, https://community.sunste.ch/assets/2023-07-11/1689078246-408763-line-Break-fullred-thin.png **Installation:** The WiFi Extender is part of a ** fully integrated smart wifi solution ** to improve the WiFi signal together with the Connect Box Modem. The extender communicates directly with the Connect Box to create a ** seamless mesh WLAN network throughout the household **. No configuration is required for the extender **. Simply connect to the socket and make sure that the network switch is located in the "ON" position. When driving up the extender, you can see a light emotion at the bottom right of the front. The automatic connection can take up to 10 minutes ** while the WiFi extender configures itself. As soon as ** the LED lights up with white **, the extender has completed the configuration and manufacture of the connection. [! [WiFi-Extender_10min_Modem] (https://one.sunrise.net/sites/default/files/styles/wide/public/2024-04/wifi-Extender _10min_modem.png? Itok = og8zbsyl)] (https://one.sunise.net/sites/default/files/2024-extender_10min_modem.png) Is everything available? [! [WiFi-Extender_installation_1] (https://one.sunrise.net/sites/default/files/styles/wide/public/2024-extender_i nstallation_1.png? iTok = llr4k-ld)] (https://one.sunise.net/sites/default/files/2024-extender_installation_1.png) ##### Connect the network adapter to the WiFi Extender and then to the socket. [! [WiFi-Extender_installation_2] (https://one.sunrise.net/sites/default/files/wide/public/2024-extender_i nstallation_2.png? iTok = 0hNyaxyh)] (https://one.sunrise.net/sites/default/files/2024-extender_installation_2.png) ##### Switch on the network switch. [! [Wifi-Extender_installation_3] (https://one.sunrise.net/sites/default/files/styles/wide/public/2024-extender_i nstallation_3.png? iTok = Jeeguglx)] (https://one.sunrise.net/sites/default/files/2024-extender_installation_3.png) After the network switch is switched on, the WiFi extender LED shines blue for 1-2 seconds, then it starts to flash green for a few seconds, and as soon as it lights up white, the WiFi is ready for operation. This takes about 10 minutes. [! [WiFi-Extender_installation_4] (https://one.sunrise.net/sites/default/files/wide/public/2024-extender_i nstallation_4.png? iTok = ddgygxnb)] (https://one.sunise.net/sites/default/files/2024-extender_installation_4.png) https://community.sunste.ch/assets/2023-07-11/1689078246-408763-line-Break-fullred-thin.png ** Positioning of the WiFi Extender ** * Place the WiFi extender around the Connect Box within a radius of 6 to 9 meters - and no more than one floor or two rooms away. * If several WLAN extenders are installed, care must be taken to ensure that they are evenly distributed and there is a strong signal between them. * The long power cable gives more flexibility. You should try to place the extender on a table or shelf - you can achieve better results when it is placed higher. * To ensure that the Connect Box and the Extender have a good signal, you should set it up free of objects and not hide the devices in cupboards or behind furniture so that the WLAN signal can spread freely. * Place both the Connect Box and the extender at least one meter of objects such as televisions and wireless speakers away. These devices can interfere with the WLAN signal. https://community.sunste.ch/assets/2023-07-11/1689078246-408763-line-Break-fullred-thin.png ** LED status display ** The WiFi Extender shows its respective status via a single LED, which is placed on the bottom right at the bottom and illuminates part of the housing edge from the inside. [! [WiFi-Extender_front-Led] (https://one.sunrise.net/sites/default/files/styles/wide/public/2024-05/wifi-Extende r_front-Led.png? Itok = z7ofJ2ce)] (https://one.sunise.net/sites/default/files/2024-extender_front-Led.png) https://community.sunste.ch/assets/2024-07-02/171990503-280444-image.png Best regards Daniele

JackBegi

Verbreitet der Extender das Haupt W-Lan und das Gäste W-Lan?

Gibt es einen unterschied wenn er via W-Lan gekoppelt ist oder via Lan?

Daniele_Sunrise

JackBegi Das Gäste WIFI wird nicht verbreitet, nur das Haupt WIFI. Wenn er via LAN gekoppelt ist, dann hast du eine bessere Sendeleistung, da das Internet via LAN beim Extender eingespiesen wird und nicht via MESH.

Liebe Grüsse
Daniele

« Previous Page