Hi Michael,
did what you requested but…. when arriving at the page of Connect Box i cannot find the ‘system’ despite have tried all available buttons, however when using ‘network diagnostic tool’ it is showing me as below. It does not show the printer at all - and that is indeed strange as the printer itself is showing that the WIFI is connected and has a very strong signal from the following ipaddress 192.168.0.180 with standard gateway 192.168.0.1,
Under subj. 5 below it is referring to a device which i do not know what is, we have 6 devices connected which is 2 ipads. two phones, one TV and this computer but nothing showing the printer ?
i dont know if the above (and below) makes any sense to you ?
Funny thing is that computer and printer is standing next to each other and should have the very same reception strength
Pleased to hear from you, thanks a lot,
best regards/Rubin
| |
| — |
| 100% |
Your home network has a few problems.
| |
| Checking Broadband Service |
| Checking Telephone Service |
| Checking Ethernet Connections |
| Checking WiFi Connections |
If you still think something is wrong please check the following:
| |
1 | The temperature of your Wireless Gateway is normal. |
2 | Your broadband connection is up. |
3 | Gateway IPv4 address is valid. |
4 | Your broadband connection is ready. |
5 | The device 34:AB:37:32:5D:BD00:09:A7:06:47:1214:A3:64:10:43:F548:51:B7:B9:F4:E798:FE:94:AD:29:7A00:26:AB:6A:4A😀ECC:78:5F:6B:C7😀C has low signal strength, please move it closer to Wireless Gateway. |
6 |
Please check your WiFi is turned on or place your WiFi device near the Wireless Gateway.
|