I have random port forwarding settings on my router: UPC or a serious problem?

mariotti · 2019-02-03T14:42:28+00:00

Sunrise community - customers help other customers with topics related to television, Internet, telephone and mobile. Register now!

mariotti

Dears,

I discovered some random port forwarding settings on my router.

I would like to know why, and if I need to get any action.

Please also note the “error_translate”. These, might be, that I just set up a WD mycloud.

But it sounds a bit scary if the WD NAS can change my router settings.

Also the other UDP ports, which I have manually disabled, are on IPs on the DHCP. I have most of my devices outside of the DHCP range (I fixed by hand IP/HW association).

Any of you has an idea?

Thanks a lot in advance.

A+

Daniele_Sunrise

@mariotti, thanks for your reply. It looks like the setting, that UDP can make port forwarding, is still active. If you want to use your own router, you can run the Connect Box in modem mode. Then you can use your own router. The Connect Box would then only operate as a pure modem.

Greetings

Daniele

mariotti

I did a reboot. The Errors at least are not there. I will remove the UDP redirects now.

If @Upc had the chance to look at this issue. I would probably move on fiber7.

At least the router should be under my control and not having UPC backdoors.