not_naro @Daniele_Sunrise Hi Daniele, Could you change my Router to IP4 so I can use Port Forwarding? Thank you in advance, Nicolas
Luatan @Daniele_Sunrise Hello, Could you change my Router aswell to IP4 so I can make use of the Port Forwarding? Greetings
Daniele_Sunrise @vukvujovic , Welcome to the Community! Please send us your customer number via private message so that we can make the switch. Greetings Daniele
vukvujovic Hi @Sunrise_Team , Could you do the same with mine? If there is a formal way to ask for it, I can do it too. Best regards, VV
Daniele_Sunrise @Electroren , In this case, please contact our support colleagues at 0800 66 88 66. They will be happy to check with you further. Greetings Daniele
Electroren Hello Daniele, I have just tried with another device, wich was working in port forwarding a long time ago, with the older modem from UPC too. Now, it does nor work eather. Renaud
Daniele_Sunrise @Electroren , Does port forwarding only do not work for this device? Does the device itself have security settings that you can customize? Everything looks fine on the modem. Greetings Daniele
Electroren Daniele, I have always been Ipv4, as I told you, and even sent an screen copy showing the port forwarding features. The problem is that the port always shows “closed” when I test it. See screen copy attached. Can you help or not? Thank you Renaud
Daniele_Sunrise @BoredEngineer , Welcome to the Community! We have changed your modem to IPv4. If you don’t have the port forwarding features, please restart your modem. Greetings Daniele
Daniele_Sunrise @Electroren , Your modem has already been switched to IPv4. If you don’t have the features, please restart your modem. Greetings Daniele
Electroren Hello Ahmet, Sorry for the delay, I was in vacation. My customer Nr is: xxxxx (Edited by Mod) Best regards Renaud
Nicolate Hi Daniele, Could you please also set my box to IPv4? I need Port forwarding but haven’t found any ways to switch by myself
Daniele_Sunrise @Electroren ,Can your Arduino WIFI module communicate externally? Is it connected to the Connect Box via WIFI and can you access your module via internal IP? Greteings Daniele
Electroren Hello Daniele, This is an arduino ESP8266 wifi module that I have programmed miself. It just shown an HTML page with datas it measures from my heating system and that I whant to consult from abroad. Thank you, Best regards Renaud
Daniele_Sunrise @Electroren , You are redirecting this port to 192.168.0.66. What kind of WIFI device is the IP 192.168.0.66? It looks like a router. If you run a router with this IP, you have a double NAT in use, which can lead to problems. Please describe exactly what you want to do with the port forwarding. Greetings Daniele